Hybrid cloud architecture: When physical, when cloud?
Nanda Teknoloji Engineering Team · · 8 min read
In brief
Hybrid cloud is a model for using physical (private) infrastructure and cloud resources together through a shared management and connectivity layer. Placement is decided for each workload by looking at criteria such as latency, data sensitivity, scale variability, and licensing; there is no single right place.
Hybrid cloud architecture is an approach in which workloads are placed in different environments according to their characteristics and these environments are joined by secure connectivity and shared management. The short answer to the question of when physical and when cloud is this: systems that are latency-sensitive, carry a steady load, or have a special hardware or license tie run on physical or dedicated servers; environments that carry variable load, need to scale out quickly, or are temporary run more comfortably in the cloud. The decision is made not on a single criterion but by looking together at each workload’s latency, data sensitivity, scaling behavior, licensing, and operational requirements. A hybrid structure also brings complexity; for that reason it should be built only when it has a concrete benefit.
What is hybrid cloud?
Hybrid cloud is an architecture in which at least two different types of infrastructure (for example dedicated physical servers and cloud servers) operate connected to each other as part of a single system. What matters is not just owning both, but establishing consistent identity management, network connectivity, monitoring, and backup arrangements between them. Two disconnected environments are not hybrid; they are just two separate environments.
Organizations usually come to this model not all at once but starting from a need: an old database cannot be moved, a regulation requires keeping data in a certain place, or additional capacity is needed during campaign periods.
Which workload suits physical and which suits cloud?
The table below is a decision aid. Each row shows a general tendency; the final decision should be made with measured data from your workload.
| Criterion | Physical / dedicated server tendency | Cloud server tendency |
|---|---|---|
| Load profile | Steady and predictable | Variable, with sudden spikes |
| Performance | Dedicated resources, consistent disk and CPU | May be shared, compensated by scaling |
| Special hardware / licensing | Licenses tied to hardware or core count | Suitable if a standard virtual machine is enough |
| Provisioning speed | Longer preparation | Within minutes |
| Temporary environments | Can be inefficient | Suitable for test, development, and short-lived projects |
| Data sensitivity | When physical isolation is wanted | If logical isolation is enough |
| Growth | Planned capacity addition | Flexible, easy to add resources |
For a detailed cost and performance comparison of the physical side, see the dedicated server vs. cloud server article. You can find the dedicated hardware option on the dedicated server rental page and the flexible side on the cloud server page.
The four core components of a hybrid architecture
- Connectivity. A secure connection with sufficient bandwidth is needed between environments. When application components are spread across different environments, latency directly affects user experience. That is why keeping components that talk frequently in the same environment is a basic design rule.
- Identity and access. Without a single identity system and consistent authorization, you have to manage two separate security models in two environments. This is a weak point for auditing and access revocation.
- Data flow and synchronization. Which environment holds the primary copy of the data, how it is replicated, and how conflicts are resolved must be determined from the start. Unnecessary data traffic affects both performance and cost.
- Monitoring and management. Seeing the metrics and logs of both environments in one place makes it possible to quickly determine which side is affected when a problem occurs.
Example scenarios
Scenario 1: A steady-load database, a variable-load web tier. In a finance application, the database stays on a dedicated physical server because of consistent disk performance and a special license. The web and application tier runs on cloud servers, set up to be replicated during campaign periods. The latency between the database and the application tier is measured and kept within an acceptable limit.
Scenario 2: Data placement driven by regulation. Records containing personal data are kept in a certain environment; analytics and test environments run in the cloud with anonymized data. The KVKK and data residency article offers the relevant framework for data residency and processing conditions.
Scenario 3: The cloud as a disaster recovery target. While production runs in the physical environment, a copy of critical systems is kept ready in a second environment. This approach can be more flexible than building a second physical location. Targets are set according to business impact; for details, see the disaster recovery center solution.
When does a hybrid structure create unnecessary complexity?
If all workloads run comfortably in a single cloud in a small environment, building hybrid only increases the management load. Even so, hybrid is worth considering in the following cases:
- There is an old system that cannot be moved and new systems have to talk to it.
- A hardware or license constraint keeps certain workloads fixed.
- Additional capacity is wanted for seasonal peaks while the main load stays steady.
- Because of data sensitivity, some data must stay in a particular environment.
- The migration is being carried out in stages and the two environments need to work together for a while. For this migration plan, see the data center migration plan article.
Network and latency: the silent determinant of a hybrid structure
In a hybrid architecture, the source of most performance complaints is not CPU or disk but latency between environments. If an application sends dozens of small queries to the database in a single request and the database is in another environment, each query waits for extra latency and the page slows down. That is why the application’s communication pattern must be mapped before the placement decision.
The practical rules are as follows:
- Keep components that work together, together. The application server and the primary database should be in the same environment.
- Make traffic between environments asynchronous. Data flows that do not require an instant response can be handled with queues or batch transfer.
- Add a backup path to the connection. A hybrid structure dependent on a single line splits into two parts when that line goes down.
- Measure traffic. Do not make a bandwidth decision without measuring the real data volume between environments.
- Account for egress charges. Data flow between environments can incur cost depending on the model used.
Security and governance: two environments, one policy
The security goal of a hybrid structure is applying the same rule in both environments. Identity management should be central, authorization should work with the same logic, and logs should be collected in a single place. Otherwise a strict rule set forms on one side and a loose one on the other, and the attacker picks the weakest link. To apply common protection at the layer that exposes web applications to the internet, consider positioning layers such as WAF and DDoS protection independently of the environment.
On the governance side as well, the following topics should be in writing: which workload may run in which environment, where a new system is placed, who is responsible for cost, and how changes are approved. Without these rules, “shadow” resources multiply over time and the hybrid structure gets out of control.
Continuity in a hybrid structure: backup and disaster recovery
Having two environments also creates an opportunity for continuity: one environment can be the recovery target of the other. But this does not happen automatically; recovery targets must be defined according to business impact. How quickly the system must come back is determined by RTO, and how much data loss can be tolerated by RPO. These two values determine whether the copy will be kept hot, warm, or cold, and in which environment it will be held. The recovery scenario must be in writing and genuinely tested at regular intervals; a recovery plan that has not been tested is merely an assumption.
Staged transition to a hybrid structure
Rather than trying to build a hybrid architecture in one move, proceeding in stages lowers risk. In the first stage, secure connectivity between environments and shared identity management are set up. In the second stage, a low-risk workload (for example a test environment or a reporting tier) is run in the cloud to measure latency, cost, and operating experience. In the third stage, based on the measurement results, the placement decision is made for critical workloads. At the end of each stage, the monitoring, backup, and security review is repeated. This approach shows the architecture’s real value and leaves room to step back if necessary.
Common mistakes
- Distributing application components across environments at random. Services that talk frequently being in different environments produces latency problems.
- Leaving connectivity as a single line. When the connection between environments is cut, the whole system is affected; a backup path should be considered.
- Splitting the security model in two. Different permission and policy sets create inconsistency and gaps.
- Keeping the backup in a single environment. If production and backup are in the same environment, there is a common failure risk.
- Seeing cost only through resources. Connectivity, data transfer, and management labor are part of total cost.
Decision summary
Answer four questions for each workload: Is the load steady or variable? Is there a data and compliance constraint? Is there a hardware or license tie? What is the latency tolerance with other components? The answers naturally distribute the workloads across environments. Once this distribution is made, the design of connectivity, identity, data flow, and monitoring determines the success of the hybrid structure.
Moving forward with Nanda Teknoloji
Nanda Teknoloji carries out the discovery, design, migration, and operation steps in projects like these: classifying workloads, a placement recommendation, connectivity and security design, and operations afterward. By evaluating dedicated server rental on the physical side and cloud server solutions on the flexible side together, we can determine the right placement for your workload with you.